THE VIBE GUIDE
A guide for the use and care of your Everlong Products
ROLL-ON FRAGRANCES OILS
Directions for Use
Apply to pulse points — wrists, inner elbows, neck, behind the ears. Lasts longer on moisturized skin. Roll on, don't rub. Reapply as needed. Keep the cap tight, store out of sunlight and heat.
Safety
Always keep away from children and pets. If skin irritation occurs, discontinue use.
MOOD MISTS
Directions for Use
Shake gently before each use.
• Room spray — Spritz into the air as needed.
• Linen spray — Hold 6–8" away from bedding and furniture. Spot-test light fabrics first.
• Body mist — Spray on clean, moisturized skin, avoiding eyes. Start light, you can always add more.
Safety
Don't spray near open flames. Keep away from children and pets. If skin irritation occurs, discontinue use.
CANDLES
Room Size for the Candle Size
• Tins: Small rooms — Bathroom / Entry
• 8 oz: Small to medium rooms — Bathroom / Home Office / Den / Guest Room
• 12.5 oz: Medium to large rooms — Living Room / Kitchen / Family Room / Dining Room
Directions for Use
• Trim the wick to ⅛"–¼" before every use. Keeps the flame safe and the burn even.
• Wood wicks — hold a lighter to the wick for 5–10 seconds on the first light. They need that extra heat.
• To avoid tunneling, burn candle until the wax melts from edge to edge, especially the first time.
Safety
Don't burn candle more than 3–4 hours at a time. Stop when ½" of wax is left. Place on a stable, heat-safe surface. Keep away from drafts, ceiling fans. Keep 2 feet away from anything flammable like drapes, or paper. Always keep away from kids and pets. Never leave a burning candle unattended.
Common Candle Issues & Fixes
Wick won't light — Trim to about ⅛" and remove the charred bit. A short, clean wick draws wax up better.
Wick won't stay lit — First time? Wood wicks need heat. Hold the lighter on it for 5–10 seconds. If it goes out, let it cool, trim the char, and relight right away. After the first use? The flame is probably drowning in wax. Let the wax cool slightly, soak up some with a paper towel, wait a minute, and relight.
Flame too large — Wick needs to be trimmed. Extinguish flame, trim, and relight.
Tunneling — Wax burns down the middle while the edges stay solid. To prevent it always let the wax melt all the way to the edges of the jar. Rule of thumb: about 1 hour per inch of diameter.
To fix early tunneling
• Foil method — Wrap foil around the candle like a tent with an opening at the top. Burn about 30 minutes until the wax melts all the way across the jar. Remove enough wax to expose ½" of the wick. Next, see "Removing melted wax". Or,
• Heat gun / Blow dryer method — Extinguish the flame. Using your heat gun / blow dryer setting, set heat to high and use lowest speed. Move in a circle until the sides melt fully. Remove enough wax to expose ½" of the wick. Next, see "Removing melted wax".
Removing melted wax
Extinguish the candle. While the wax is still liquid and warm, press a folded paper towel into it to absorb the wax. Repeat until ½" of the wick is exposed. Trim the charred wick to ¼", let the wax harden, relight.
Still having trouble?
Email us at hello@everlongcandleco.com. Include the candle name, what's happening, and a photo — we'll figure it out together.